Foreword
This guide is designed to provide firewall recommendations for settings and port openings. Evolve strides to provide the most ideal settings for the most common firewalls. However, knowing the exact settings for customer firewalls, IT vendors, and ISP carriers is the responsibility of the customer and their contracted IT vendors
Port Openings
A Customer
Named Server List for ACLs | Ports | Purpose | Status |
---|---|---|---|
voip.evolveip.net |
|
| Active |
| HTTP(S) | Active | |
dms-adp-a.voip.evolveip.net | 443 | mTLS DMS | Active |
B Customer
Named Server List for ACLs | Ports | Purpose | Status |
---|---|---|---|
voip-b.evolveip.net |
|
| Active |
| HTTP(S) | Active | |
dms-adp-b.voip.evolveip.net | 443 | mTLS DMS | Active |
C Customer
Named Server List for ACLs | Ports | Purpose | Status |
---|---|---|---|
voip-c.evolveip.net |
|
| Active |
| HTTP(S) | Active | |
dms-adp-b.voip.evolveip.net | 443 | mTLS DMS | Active |
D Customer
Named Server List for ACLs | Ports | Purpose | Status |
---|---|---|---|
voip-d.evolveip.net |
|
| Active |
| HTTP(S) | Active | |
dms-adp-b.voip.evolveip.net | 443 | mTLS DMS | Active |
F Customer
Named Server List for ACLs | Ports | Purpose | Status |
---|---|---|---|
voip-f.evolveip.net |
|
| Active |
| HTTP(S) | Active | |
dms-adp-b.voip.evolveip.net | 443 | mTLS DMS | Active |
Network Requirements for Webex Services
https://help.webex.com/en-us/article/WBX000028782/Network-Requirements-for-Webex-Services#id_134894
Document Revision History
This article is intended for network administrators, particularly firewall and proxy security administrators who want to use Webex messaging and meetings services within their organization. It will help you configure your network to support the Webex Services used by HTTPS based Webex app and Webex Room devices, as well as Cisco IP Phones, Cisco video devices, and third-party devices that use SIP to connect to the Webex Meetings service.
This document primarily focuses on the network requirements of Webex cloud registered products that use HTTPS signaling to Webex cloud services, but also separately describes the network requirements of products that use SIP signaling to join Webex Meetings. These differences are summarized below:
Summary of device types and protocols supported by Webex
Transport protocols and encryption ciphers for cloud registered Webex apps and devices
Webex traffic through Proxies and Firewalls
Most customers deploy an internet firewall, or internet proxy and firewall, to restrict and control the HTTP based traffic that leaves and enters their network. Follow the firewall and proxy guidance below to enable access to Webex services from your network. If you are using a firewall only, note that filtering Webex signaling traffic using IP addresses is not supported, as the IP addresses used by Webex signaling services are dynamic and may change at any time. If your firewall supports URL filtering, configure the firewall to allow the Webex destination URLs listed in the section "Domains and URLs that need to be accessed for Webex Services".
Webex Services – Port Numbers and Protocols
...
Destination Port
...
Protocol
...
Description
...
Devices using this rule
...
(1) If you are using NTP and DNS services within your enterprise network, then ports 53 and 123 do not need to be opened through your firewall.
(2) The Webex Web-based app and Webex SDK do not support media over TLS.
IP subnets for Webex media services
Webex signaling traffic and Enterprise Proxy Configuration
Most organizations use proxy servers to inspect and control the HTTP traffic that leaves their network. Proxies can be used to perform several security functions such as allowing or blocking access to specific URLs, user authentication, IP address/domain/hostname/URI reputation lookup, and traffic decryption and inspection. Proxy servers are also commonly used as the only path that can forward HTTP based internet destined traffic to the enterprise firewall, allowing the firewall to limit outbound internet traffic to that originating from the Proxy server(s) only. Your Proxy server must be configured to allow Webex signaling traffic to access the domains/ URLs listed in the section below:
Domains and URLs that need to be accessed for Webex Services
Additional URLs for Webex Hybrid Services
Your Proxy server must be configured to allow Webex signaling traffic to access the domains/ URLs listed in the previous section. Support for additional proxy features relevant to Webex services is discussed below:
follow this link for additional info below:
https://help.webex.com/en-us/article/WBX000028782/Network-Requirements-for-Webex-Services#id_134759
802.1X – Port based Network Access control :
Network requirements for SIP based Webex services:
Network Requirements for Webex Edge Audio:
A summary of other Webex Hybrid Services and documentation:
Webex Services for FedRAMP customers:
...